Meshcore Setup

9/13/26

By:

Jeff Scoville

How to Set up Meshcore

Here is some information on how to get started on Meshcore in Tulsa from the http://corescope.tulsa-mesh.com web site, courtesy of Tyler:

1) Flash the Meshcore Firmware. Pick the role you want: companion (paired to your phone), repeater, or room server. Web flasher: http://flasher.meshcore.io

2) Set the Tulsa radio parameters. From the serial console on Meshcore at 115200 baud:

set radio 910.525,62.5,7,5
set tx 22

3) If you are using an existing Tulsa Meshtastic named node, you can bring the same named node to Meshcore. For example, I am TUL1 TWITCHY OVERTIME PREDICTS on both Meshtastic and Meshcore.

4) Go to http://corescope.tulsa-mesh.com and see if you show up in the packets list from the observers currently in Tulsa.